产品中心

Product Center

双面数码打印机

双面喷印花机技术参数
产品型号Model HJ-DF1
喷头型号Print head Model
理光GEN5喷头 Ricoh Gen5 printhead
喷头数量Number of printhead
①高精度型(High Precision Model):2组喷头,每组4个(two head modules, 4 heads each module);
②高速型(High Speed Model):2组喷头,每组8个 (two head modules, 8 heads each module)
打印机工作模式Operating mode of printer ①两组喷头双面同步数码打印 two head modules printing at both side of fabric at the same time. ②
可以仅仅使用单组喷头对面料单面喷印 can print on one side of fabric with single head module only.
打印精度与速度Printing Precision and speed 2pass(600*600dpi):32m/h,即58㎡/h;
3pass(600*900dpi): 22m/h,即39㎡/h;
4pass(600*1200dpi):16m/h,即29㎡/h。
最大打印宽度Maximum printing width 1800mm
打印材料Printing Media
棉, 真丝, 羊毛,麻,化纤(所有无弹性面料) cotton, silk,wool,linen(all kind fabric without tension)
墨水类型Ink type
活性墨水, 酸性墨水, 分散直喷墨水或其他
Reactive Ink, Acid Ink, Disperse Direct printing Ink, etc...
墨水颜色Ink color
可装8色 (with 8 color) C ,M, Y, K, O, LM, B, LC.
喷头清洗方式Print head Cleaning
全自动碰头清洗、自动刮墨和保湿系统Automatic PH cleaning、Automatic scraping and Moisturizing system
可放入面料最大直径Maximum diameter for fabric 450mm.
数据传输Data transmission
TCP/IP 网络接口 TCP/IP Network interface
RIP 软件 RIP Software
Ergosoft
烘干方式Drying system
打印前烘干&打印后烘干,可同时使用也可分开使用, 温度可根据不同面料和湿度调节 drying before and after printing , can working separately or working at the same time , temperature can be adjusted as per the fabric and humidity.
电源Power supply
AC380V
功率Votage
18KW
打印机尺寸Printer Dimension
L4026mm×W1600mm×H2000mm
机器重量Weight
1200KG
工作气压Working pressure
0.6MPA
工作环境Working environment
温度Temperature 20-30℃,湿度Humidity 50%-80%


上一篇:已经没有了

下一篇:已经没有了